Brett wrote:If we are serious we need one brilliant Bushwalking Shop in Launceston rather than the six we have at the moment.
I notice that MD in Launceston was gradually been stocking more rugged brands and is a good place to compare and check out One Planet versus Wilderness Equipment packs. PP still have a reasonable range of some stuff but must be feeling rather hurt by Macpac pull out as they did push that brand.
But there are those among us who realise that you need to pay more for a product that will last. Not always the case but if you know the gear is good but it is expensive, you have a choice.Steven wrote:Part of the problem is that Australian made gear cannot compete on price with gear made offshore
What's wrong with cheaper washing machines?
The trouble with many washing machines these days, is that their design and reliability seems to be dictated almost entirely by costs. The majority of washing machine manufacturers are fighting out a long running price war, which will probably end up with them all being taken over by large global companies until there are just one or two companies making washing machines worldwide. Already, many apparently competing washing machines are actually owned by the same companies. ( Who owns who? Who really makes your washing machine )
In an ideal world, companies making a product should make it as well as they possibly can, and then sell it at what it costs, plus the profit margin. Unfortunately though, this results in a product costing a lot more than the average person is prepared to pay. So manufacturers usually do it the other way round. They find out or guess what most people will pay and build the product to sell at that price. This usually results in a lot of corners being cut, then as competition increases, these products can become lower and lower in quality until they become rubbish - but most people still buy them because they won't pay for a "proper" one. People usually get what they pay for. Frankly, if you've had nothing but trouble for many years with your washing machines and think they are rubbish, it's possibly because you won't pay up for a good one. To be fair though, most people just don't think of it like this, or aren't even aware that high quality washing machines are available. ( If you're thinking, "what does he mean, I paid a lot of money for my last washing machine?" Read this - If I buy a more expensive washing machine do I actually get a better one? )
The manufacturers who have decided to compete in the most competitive price range, must keep their washing machines strictly within this price range at all costs. As manufacturing costs constantly increase, they daren't pass on the costs to customers. Manufacturing costs constantly have to be cut to maintain the final selling price and stay in the competition. To be fair, many cost savings are achieved with improved manufacturing techniques and other methods, but there's only so far you can go without having to start compromising quality.
Ultimately, the obsession with supplying washing machines at ridiculously cheap prices has resulted in a plethora of virtually throwaway washing machines. These washing machines are noisy in operation, dance around the kitchen, and suffer long known about and totally unnecessary breakdowns.
I've seen mains cables and fill hoses get so short they don't even reach in many situations. Many washing machines now have basic time-locks which make a customer wait two minutes to open the door whereas before they had more sophisticated (and more expensive) systems that let the customer into the machine as soon as it stopped.
Over the last 30 years, I've seen many individual parts getting cheaper - but much poorer in quality. Dozens of metal parts have been replaced by plastic parts, and parts that used to be repaired if a minor fault occurred, now only come as complete items. The worst example of this is when a simple coil goes open circuit on a motor, or a bearing wears. The only option on many of the cheaper washing machines is to fit a whole new motor which costs nearly as much as the machine did in the first place. This, is one of the hidden costs of cheap washing machines.
In fact, many of these manufacturers now appear to rely heavily on the profit from supplying spare parts to make up the shortfall in profit from making the washing machines in the first place. If this is the case, then they don't have much incentive to improve the quality of some of the parts inside.
The reason I make this comparison is that it concentrates the mind on how unrealistically cheap many washing machines now are. I really don’t know how so many manufacturers of washing machines are still in business when the product they produce is apparently valued so little that they can’t even sell them at a reasonable price. At £199 the washing machine is not going to get repaired. Most people will dump it the first time it breaks down. Even the manufacturer’s repair agents will charge £97 (inc. VAT) to repair it out of warranty and that’s if it didn’t need any spare parts (last price check Jan 2007) They can’t just keep churning them out in their millions forever, they are overfilling our landfill sites.
We’ve had throwaway products for many years and I don’t mind admitting that it never bothered me before. Advances in manufacturing that enables production of very cheap products inevitably means they will never be economical to repair but it just didn’t seem too bad when I was throwing away small items. Now that the not-worth-repairing problem has started to include big things like washing machines and fridges it doesn’t seem right any more. Maybe it’s now time to consider making it illegal to produce certain products that can’t be economically repaired? Where is all this leading?
Users browsing this forum: No registered users and 32 guests