More pegs

Bushwalking gear and paraphernalia. Electronic gadget topics (inc. GPS, PLB, chargers) belong in the 'Techno Babble' sub-forum.
Forum rules
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need, plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.

More pegs

Postby Franco » Wed 30 Nov, 2011 2:39 pm

Inspired by Mic's pic of her pegs I thought to put an update (as if anyone cared) about my peg usage.
There is the possibility that I, at some point, poo pooed thin pegs but in my last walk I had a shelter that takes a minimum of 6 pegs and works better with 8, so as usual I wanted a couple of spare ones.
That is a total of TEN pegs...
So I opted to take 2 of those thin Ti shepherd hook thingo .
Image
I used those for the guylines.
As it happens , on the last pitch I had a beautifully flat and elevated rectangle for my floor area but an uneven and rocky vestibule and surrounding soil.
At this point the thin Ti pegs worked really well because it was very easy to push them in between the roots and rocky bits.
One of the guylines was right into the wind, still the peg did not move, in fact did not turn it self as I was sort of expecting.
My verdict : well worth looking into them.
(about 6g each. On my scale 3 are "15g" 4 between 20 and 25 g)
Available on eBay (nothing to do with me...)
Note : individually painted. I know that it looks superprofessional but I did it myself.

Franco
Franco
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 2916
Joined: Thu 30 Oct, 2008 6:48 pm
Region: Victoria
Gender: Male

Re: More pegs

Postby corvus » Thu 01 Dec, 2011 3:16 pm

Franco I have used these with some success ,what paint did you use and how did you change the shape :)
They are available from http://www.adventurefriends.com.au for around $3.00 each with free delivery.
corvus
collige virgo rosas
User avatar
corvus
Vercundus gearus-freakius
Vercundus gearus-freakius
 
Posts: 5488
Joined: Mon 23 Apr, 2007 7:24 pm
Location: Devonport
Region: Tasmania
Gender: Male

Re: More pegs

Postby hikin_jim » Thu 01 Dec, 2011 3:33 pm

Looks like some good, practical pegs. I too was very skeptical of thin pegs, but I've found them to work better than expected, and they are LIGHT. Tent pegs are an ideal application for titanium in my opinion, far better than in cookware where to my mind the value is a bit questionable.

HJ
Stove reviews and information: Adventures in Stoving
User avatar
hikin_jim
Athrotaxis cupressoides
Athrotaxis cupressoides
 
Posts: 382
Joined: Thu 24 Nov, 2011 3:44 pm
Location: Orange County, CA, USA
Region: Other Country
Gender: Male

Re: More pegs

Postby Franco » Thu 01 Dec, 2011 4:38 pm

Hi Corvus
No they are not the Vargo.
I just had a quick look on eBay and I cannot find them but they ere sold from Hong Kong.
So they come with that shape purposely so that if they turn the head will still catch the line.
They are about 3mm thick , from memory a bit thicker tan the Vargo.
(they could be available from BackpackingLight.com.au)
My crappy paint job was from a can of enamel orange safety paint (it was on special at bunnings...)
It rubs off..

Jim
Yes Ti is good for boiling water...
I like it and use it because of the weight and because it does not dent easily, however I use aluminium to melt snow.
A mate has the new JetBoil Sol in aluminium, his pot kept the heat noticeably longer than my Ti mug.
(works really well even with some wind. I use the TiTri Caldera Cone)
That is why I would not bother with the Ti version of the Sol.
Franco
Franco
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 2916
Joined: Thu 30 Oct, 2008 6:48 pm
Region: Victoria
Gender: Male

Re: More pegs

Postby corvus » Thu 01 Dec, 2011 5:46 pm

Oh well looks like I need to try the two pliers trick :lol:
corvus
collige virgo rosas
User avatar
corvus
Vercundus gearus-freakius
Vercundus gearus-freakius
 
Posts: 5488
Joined: Mon 23 Apr, 2007 7:24 pm
Location: Devonport
Region: Tasmania
Gender: Male

Re: More pegs

Postby photohiker » Thu 01 Dec, 2011 5:50 pm

Franco wrote:A mate has the new JetBoil Sol in aluminium, his pot kept the heat noticeably longer than my Ti mug.
(works really well even with some wind. I use the TiTri Caldera Cone)
That is why I would not bother with the Ti version of the Sol.
Franco


Agree that Ti use on cookware is questionable, but also note that the Al version of the Sol comes with a thicker cozy than the Ti and your Ti mug has?

Pegs sound good, must try mine, I shelved them for the same sort of reasons...
Michael
User avatar
photohiker
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 3097
Joined: Sun 17 May, 2009 12:31 pm
Location: Adelaide, dreaming up where to go next.

Re: More pegs

Postby Nuts » Thu 01 Dec, 2011 6:55 pm

Watch you dont snapem' :)
User avatar
Nuts
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 8555
Joined: Sat 05 Apr, 2008 12:22 pm
Region: Tasmania

Re: More pegs

Postby corvus » Thu 01 Dec, 2011 7:59 pm

Will use mini gas torch to make them more malleable :)
corvus
collige virgo rosas
User avatar
corvus
Vercundus gearus-freakius
Vercundus gearus-freakius
 
Posts: 5488
Joined: Mon 23 Apr, 2007 7:24 pm
Location: Devonport
Region: Tasmania
Gender: Male

Re: More pegs

Postby hikin_jim » Fri 02 Dec, 2011 2:48 am

Nuts wrote:Watch you dont snapem' :)

Ti is quite strong. My older Al pegs bend pretty easily. The Ti ones resist bending much better. Just one person's experience.

HJ
Stove reviews and information: Adventures in Stoving
User avatar
hikin_jim
Athrotaxis cupressoides
Athrotaxis cupressoides
 
Posts: 382
Joined: Thu 24 Nov, 2011 3:44 pm
Location: Orange County, CA, USA
Region: Other Country
Gender: Male

Re: More pegs

Postby Nuts » Fri 02 Dec, 2011 8:29 am

They are tough. However, I went to bend the two for my caldera Cone (so they would fit in the pot with everything else) the first snapped at the bend so i did the same with the second (the shorter peg was actually fine by me so i didn't bother heating it).
User avatar
Nuts
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 8555
Joined: Sat 05 Apr, 2008 12:22 pm
Region: Tasmania

Re: More pegs

Postby John Sheridan » Sat 21 Jan, 2012 10:56 pm

Anyone know where I can buy Titanium tent pegs in Australia, trying to put together my home made tarp tent made from thermal blankets, last piece is some light weight pegs.


Cheers.
User avatar
John Sheridan
Athrotaxis cupressoides
Athrotaxis cupressoides
 
Posts: 462
Joined: Sun 10 Jul, 2011 1:02 am
Region: New South Wales
Gender: Male

More pegs

Postby Rico » Sun 22 Jan, 2012 12:24 am

John Sheridan wrote:Anyone know where I can buy Titanium tent pegs in Australia, trying to put together my home made tarp tent made from thermal blankets, last piece is some light weight pegs.


Cheers.


Hi John,

I may be able to help. We have a good selection of titanium tent pegs here http://adventurefriends.com.au/tent-accessories/

Plus we offer free shipping and 10% discount store wide to the members of the forum. Just use the code BUSHWALK at check out.

Rico
User avatar
Rico
Atherosperma moschatum
Atherosperma moschatum
 
Posts: 97
Joined: Thu 03 Nov, 2011 8:57 pm
ASSOCIATED ORGANISATIONS: www.adventurefriends.com.au
Region: Queensland
Gender: Male

Re: More pegs

Postby John Sheridan » Mon 30 Jan, 2012 5:15 am

Rico thanks for the pegs I got me 12 of them, yet to use them, but saw a few posts where they are said to work well, showgrounds with tough ground are conquered with them :)

They be FRACKING LIGHT :o


Cheers.
User avatar
John Sheridan
Athrotaxis cupressoides
Athrotaxis cupressoides
 
Posts: 462
Joined: Sun 10 Jul, 2011 1:02 am
Region: New South Wales
Gender: Male

Re: More pegs

Postby roysta » Mon 30 Jan, 2012 3:00 pm

The Vargo pegs work well, had to get some new one from Adventurefriends.
I made the stupid mistake of putting my pegs in my carry-on luggage when leaving NZ, you got it, I lost them.
User avatar
roysta
Phyllocladus aspleniifolius
Phyllocladus aspleniifolius
 
Posts: 674
Joined: Mon 22 Dec, 2008 8:14 am
Location: New South Wales
Region: New South Wales
Gender: Male

Re: More pegs

Postby Ent » Mon 30 Jan, 2012 3:48 pm

Hi

Just when I thought I found an indestructible peg I found a person that could bend it. Have a set of Hilleberg (probably another brand sold under that name) titanium spikes for tricky hard ground. They are about five mm or greater in diameter. I have used them as nails at times (only in dead trees mind you) and found them tough as, o’well no pun , as nails. But my friend managed to bend one quite badly. And before anyone askes, no tools were involved :shock: Also “destroyed” were a few of the lighter weight aluminium ones but they are not particular strong. I think that the un-bendable or un-breakable peg has met its match.

Cheers
"lt only took six years. From now on, l´ll write two letters a week instead of one."
(Shawshank Redemption)
User avatar
Ent
Lagarostrobos franklinii
Lagarostrobos franklinii
 
Posts: 4059
Joined: Tue 13 May, 2008 3:38 pm
Region: Tasmania


Return to Equipment

Who is online

Users browsing this forum: No registered users and 23 guests