wildwanderer wrote:Personally I don't think a sighting mirror is necessary and just adds bulk, weight and gets in the way when you place your compass on a map. Its very easy to take a bearing on a distant landscape feature using just a normal compass.
I find the simple plastic compasses are the best. Its nice to be able to see through the compass plastic to look at the map. Something with a printed distance scale is also nice.
The only bells and whistles feature I have on my compass is a declination adjustment notch. Saves all the 'hardcore' maths
slparker wrote:I have been using a compass for 30 years and have never heard of declination adjustment.
I always work out my bearing after adjusting for grid-magnetic variation and local magnetic drift - I prsume that it has something to do with this.
If so, you surely still need to do the 'dangerous maths' of working out these differences?
A Jay wrote:slparker wrote:I have been using a compass for 30 years and have never heard of declination adjustment.
I always work out my bearing after adjusting for grid-magnetic variation and local magnetic drift - I prsume that it has something to do with this.
If so, you surely still need to do the 'dangerous maths' of working out these differences?
Compasses with declination adjustment are a large part of the compass market now. These compasses have a key and a hole on the reverse side of the baseplate where you adjust the declination and it stays adjusted. You don't have to adjust manually anymore if the declination remains the same.
It's an extremely common feature in a compass these days, although according to TraditionalMountaineering, the Silva Ranger for the last 30 years was the only compass that had the declination adjustment. Now, they're everywhere and virtually every guide's suggesting navigators use a compass with declination adjustment to avoid the "dangerous" maths in the field, a matter of safety.
Neo wrote:I picked a Suunto A-30.
Second most basic model. Its been fine to use with a topo and do handheld bearings.
Has a magnifier, glow in the dark bezel and a circle&triangle for tracing if you want to.
Silva is popular but I read a few reviews of them not being accurate/solid.
Just turn the bezel to suit your maps declination (11° east coast usually).
About $36 online
slparker wrote:A Jay wrote:slparker wrote:I have been using a compass for 30 years and have never heard of declination adjustment.
I always work out my bearing after adjusting for grid-magnetic variation and local magnetic drift - I prsume that it has something to do with this.
If so, you surely still need to do the 'dangerous maths' of working out these differences?
Compasses with declination adjustment are a large part of the compass market now. These compasses have a key and a hole on the reverse side of the baseplate where you adjust the declination and it stays adjusted. You don't have to adjust manually anymore if the declination remains the same.
It's an extremely common feature in a compass these days, although according to TraditionalMountaineering, the Silva Ranger for the last 30 years was the only compass that had the declination adjustment. Now, they're everywhere and virtually every guide's suggesting navigators use a compass with declination adjustment to avoid the "dangerous" maths in the field, a matter of safety.
Well that's where i am confused, what exactly are you adjusting for?
If it is the difference between grid and magnetic north it depends on which map you are using so there is no 'set and forget' declination to set. You still have to do the 'dangerous maths' ( if you can call substraction and addition 'dangerous') every time you use a different map in a different area.
Neo wrote:Matrix? Please explain. I write my own material!
Yeah second from the bottom or base model. I didn't know/want to spend or over do it on my first compass. Pending future accidents this one may see me out! (southern hemisphere)
wildwanderer wrote:On the subject of compasses. My Suunto M3's liquid has long since drained out of the compass with a few crystalline flakes remaining. Either that or somehow salt got into the bezel area.
Does anyone know if its possible (and how)to replace the liquid ? Compass still works fine, but Id prefer the liquid in there for needle stability if there is a way
EDIT. actually looking closely the liquid may still be there, its a bit hard to tell.. but there are these flakes in the liquid like salt ..
A Jay wrote:wildwanderer wrote:On the subject of compasses. My Suunto M3's liquid has long since drained out of the compass with a few crystalline flakes remaining. Either that or somehow salt got into the bezel area.
Does anyone know if its possible (and how)to replace the liquid ? Compass still works fine, but Id prefer the liquid in there for needle stability if there is a way
EDIT. actually looking closely the liquid may still be there, its a bit hard to tell.. but there are these flakes in the liquid like salt ..
I could be wrong, but I would have thought you'd have known if liquid had began to go out because there might have been air bubble develop.
In my research, they say not to get ones with air bubbles, they can be inaccurate, and as you probably already know, they develop due to exposure to very cold temps. Anyway that's off subject.
But I would have thought you'd know if liquid was going due to air bubbles. Could be wrong though.
wildwanderer wrote:A Jay wrote:wildwanderer wrote:On the subject of compasses. My Suunto M3's liquid has long since drained out of the compass with a few crystalline flakes remaining. Either that or somehow salt got into the bezel area.
Does anyone know if its possible (and how)to replace the liquid ? Compass still works fine, but Id prefer the liquid in there for needle stability if there is a way
EDIT. actually looking closely the liquid may still be there, its a bit hard to tell.. but there are these flakes in the liquid like salt ..
I could be wrong, but I would have thought you'd have known if liquid had began to go out because there might have been air bubble develop.
In my research, they say not to get ones with air bubbles, they can be inaccurate, and as you probably already know, they develop due to exposure to very cold temps. Anyway that's off subject.
But I would have thought you'd know if liquid was going due to air bubbles. Could be wrong though.
I think your right. The liquid is probably still in there. Got no idea where the flakes came from though... doesn't seem to be any lettering etc crumbling off
A Jay wrote:Do you mean I don't need anything too fancy?
Orion wrote:A Jay wrote:Do you mean I don't need anything too fancy?
I don't know what level of accuracy you need.
The point of my story is that you should fit the tool to the task.
It would have been silly for me to have carried a sighting compass.
But that doesn't mean you don't need one.
A Jay wrote: Your post was about as accurate as the button compass you were using.
Orion wrote:A Jay wrote: Your post was about as accurate as the button compass you were using.
They were each as accurate as necessary for the circumstances.
A Jay wrote:Why don't you stick your head in the weather station, that should clear your sinuses and improve your accuracy. Replace the button compass so you can tell the direction.
Orion wrote:A Jay wrote:Why don't you stick your head in the weather station, that should clear your sinuses and improve your accuracy. Replace the button compass so you can tell the direction.
You're projecting your own needs. I was quite happy with the accuracy.
Users browsing this forum: No registered users and 21 guests