Discussion about making bushwalking-related equipment.
Post a reply

Re: Sil tarp corner reinforcements

Sun 04 Oct, 2015 7:16 am

I usually fold the tape and cross it over
Let us all know how that holds up
As we are still [ STILL] renovating I can't even find my fabric to make my own tarp
What's the little doohickey you are using?

Re: Sil tarp corner reinforcements

Sun 04 Oct, 2015 9:35 am

It's all an experiment on this one including binding the ridgeline - will let you know. The hardware is a Silkworm 0.5g

Lightweight tarp 047_640x427.JPG
Lightweight tarp 047_640x427.JPG (105.36 KiB) Viewed 8512 times


Lightweight tarp 044_640x427.JPG
Lightweight tarp 044_640x427.JPG (51.27 KiB) Viewed 8512 times


Lightweight tarp 043_640x427.JPG
Lightweight tarp 043_640x427.JPG (71.07 KiB) Viewed 8512 times

Re: Sil tarp corner reinforcements

Sun 04 Oct, 2015 10:12 am

Interested in the way the ridgeline works as I was going to do something very similar on the old cotton sheets fly I was planning for the old PaddyMade japara tent

Re: Sil tarp corner reinforcements

Sun 20 Dec, 2015 4:49 pm

How did that corner tape hold up to the test?

Re: Sil tarp corner reinforcements

Sun 20 Dec, 2015 7:52 pm

So far so good. I have had it out in some heavy wind in the backyard and it held up fine. I have made a slight change with how I sew them but it essentially remains the same.
Attachments
Lightweight tarp 135_640x427.JPG
Lightweight tarp 135_640x427.JPG (108.55 KiB) Viewed 8239 times
Lightweight tarp 142_640x427.JPG
Lightweight tarp 142_640x427.JPG (108.58 KiB) Viewed 8239 times
Lightweight tarp 130_640x427.JPG
Lightweight tarp 130_640x427.JPG (112.51 KiB) Viewed 8239 times
Post a reply