Just completed my synthetic quilt. It was a very interesting and somewhat theraputic task........I found patience I didn't know I had
Thanks to all who offer their ideas and demo their skills............I wouldn't have known where to start without your posts.
Materials list - all purchased from Tiergear...thanks Simon
Argon 67 - brown 2 metres
Ripstop nylon 37 g/m² (1.1oz) - breathable/calendered - black - 2 metres
Climashield Apex 6.0oz - Insulation - 2 metres (4 units)
Total cost for the quilt $100.00 even (excluding postage)
Gutermann Mara 70 thread - Olive
I cut the top and bottom materials together with my soldering iron..........serves two purposes in sealing the edges and welding the two sheets of fabric together.
Cut the insulation a bit outside the material size.........maybe could have given another 25mm to tighten the fit.
The footbox is wider than it is high as I'm a side sleeper.
Stitched diagonally on corners to hold the insulation in place.
Strategically placed thread loops sewing top and bottom together but with slack to allow the insulation to loft.
In dry bag - 360 long x 200 wide x 150 high - 757 grams.

- Inside Argon 67- brown and Outside Ripstop nylon 37 g/m² (1.1oz) - breathable/calendered - black
- Cut material.jpg (131.65 KiB) Viewed 26272 times

- Climashield Apex 6.0oz - Insulation
- Unsulation cut to size.jpg (122.79 KiB) Viewed 26272 times

- Top side all finished
- Top side finished.jpg (120.77 KiB) Viewed 26272 times

- Bottom side all finished
- Bottom side finished.jpg (146.04 KiB) Viewed 26272 times

- In my MYOG Cuben dry bag - fits very snug
- In home made Cuben dry bag.jpg (147.35 KiB) Viewed 26272 times

- Weighs 575grams all up
- All up 757grams.jpg (150.07 KiB) Viewed 26272 times
Any questions gladly answered....................now to get out there and try it out.
Last edited by
neilmny on Fri 27 Mar, 2015 2:09 pm, edited 1 time in total.