For all high tech electronic equipment including GPS, PLB, chargers, phones, computers, software. Discussion of simple electrical devices such as torches, belongs in the main 'Equipment' forum.
Post a reply

PLB rescueME 115 grams

Tue 30 Apr, 2013 10:52 am

Hi all,

I was in at Mountain Designs Launceston yesterday where I bought my ResQLink+ PLB which I love and the guy was telling me about a new one that is even smaller. Reckon it is this one called a rescueME.

http://www.chsmith.com.au/Products/rescueME-PLB1.html

The dimensions are:-
35*50*75 and 115g for rescueME add another 49 grams for floating pouch
33*48*99 and 130g for ResQLink
41*48*114 and 153g for ResQLink+ which floats

I went with the ResQLink+ so it is easy to use on the water as well but this new one sounds great and then just take the floating pouch when on the water.

Good list of specs here:-

http://www.datrex.com/index/catalogdetail/pdt_id/1049
Also click on the photo and see 9 images.

user manual 3.3mb
http://www.datrex.com/index/pdfdownloads/doc_id/94

Cheers,
Andrew

Re: PLB rescueME 115 grams

Tue 30 Apr, 2013 11:33 am

Damm, I am going to have to sell my ResQlink now to save those grams..

Good to see them getting smaller, more likely people are to carry them

Re: PLB rescueME 115 grams

Tue 30 Apr, 2013 11:38 am

more likely people loose them :mrgreen:

Re: PLB rescueME 115 grams

Tue 30 Apr, 2013 11:46 am

wayno wrote:more likely people loose them :mrgreen:

Looks pretty tight to me!

Re: PLB rescueME 115 grams

Tue 30 Apr, 2013 12:14 pm

About 14 g less than a ResQLink. Nice to see the weight coming down.

HJ

Re: PLB rescueME 115 grams

Tue 30 Apr, 2013 12:16 pm

Oh and another thing the Mountain Designs guy told me was that the Australian importer of ResQLink had stopped importing them and that they couldn't get them anymore.

Cheers,
Andrew

Re: PLB rescueME 115 grams

Wed 01 May, 2013 11:54 am

I'm a bit confused by the antenna situation on all these devices... are any of them actually able to be operated with one hand?

Re: PLB rescueME 115 grams

Wed 01 May, 2013 11:58 am

i've got a fastfind,,, you have to pull a sealed cap off to expose the alarm button and aerial so you can unfurl the aerial. so ideally need two hands to at least get the cap off..

Re: PLB rescueME 115 grams

Wed 01 May, 2013 12:17 pm

Actually I wonder if the rescueME is too easy to activate accidentally. That little flap covering the button looks like it could get opened without meaning to. If you need to use two hands to unfurl the aerial anyway, maybe it is better to require two hands to expose the button, to prevent accidental activation?

Though anything's going to be better than my mobile ;)

Re: PLB rescueME 115 grams

Wed 01 May, 2013 12:20 pm

most shops selling locator beacons have dummy ones you can get your hands on to see how they work

Re: PLB rescueME 115 grams

Wed 01 May, 2013 12:26 pm

i'd be taking advantage of the flotation bag otherwise i'd be taping the flap down to stop it getting accidentally opened and activated

Re: PLB rescueME 115 grams

Thu 01 Aug, 2013 9:28 pm

Picked up one of these today. Has anybody else had trouble registering theirs with AMSA? I keep getting this message: "The Beacon Hex ID/UIN is invalid for the entered Checksum. Please ensure that both the Beacon Hex ID and Beacon Checksum present on your beacon have been entered correctly."

Cheers

Re: PLB rescueME 115 grams

Thu 01 Aug, 2013 9:41 pm

findbuddha wrote:Picked up one of these today. Has anybody else had trouble registering theirs with AMSA? I keep getting this message: "The Beacon Hex ID/UIN is invalid for the entered Checksum. Please ensure that both the Beacon Hex ID and Beacon Checksum present on your beacon have been entered correctly."

Cheers

Does it have a Checksum? My ResQlink didn't.

Re: PLB rescueME 115 grams

Thu 01 Aug, 2013 11:11 pm

findbuddha wrote:Picked up one of these today. Has anybody else had trouble registering theirs with AMSA? I keep getting this message: "The Beacon Hex ID/UIN is invalid for the entered Checksum. Please ensure that both the Beacon Hex ID and Beacon Checksum present on your beacon have been entered correctly."

I registered my rescueME PLB1 about two months ago. I recall there was a problem similar to your description. I think I just ignored it and used the SN. All good.

Re: PLB rescueME 115 grams

Fri 02 Aug, 2013 9:05 am

Thanks! Strider it did have a checksum and I was wary of registering it without.

Re: PLB rescueME 115 grams

Fri 02 Aug, 2013 9:39 am

I think it would be worth calling AMSA to be sure. Definitely don't ignore any part of the registration process - this is a safety device after all!

Re: PLB rescueME 115 grams

Sat 03 Aug, 2013 7:50 pm

Checksum you mean the UIM?
If thats the case you need to watch the zero against the "O"?

Now theres an interesting one, "Proof Of registration Expiry Date". Never looked at that before. I wonder if theres an automoted message.

Re: PLB rescueME 115 grams

Sat 03 Aug, 2013 8:00 pm

Checksum you mean the UIM?
If thats the case you need to watch the zero against the "O"?

Now theres an interesting one, "Proof of Beacon Registration Expiry Date". Never looked at that before. I wonder if theres an automated message.



Ive seen people use the WT F acronym before .....

Screen shot 2013-08-03 at 7.56.22 PM.png
Screen shot 2013-08-03 at 7.56.22 PM.png (28.37 KiB) Viewed 41222 times
Thats a bit harsh isnt it? Twenty seconds rule or something? Goana sea sum speling mystakes!

Re: PLB rescueME 115 grams

Sat 03 Aug, 2013 8:07 pm

Checksum is a number additional to the UIN. Mine didn't have one.

Proof of beacon registration is the sticker they send you.

Re: PLB rescueME 115 grams

Sat 03 Aug, 2013 8:12 pm

I ignored the checksum in my registration and no problem resulted. Received the registration sticker no problem. Does it matter?

Re: PLB rescueME 115 grams

Sat 03 Aug, 2013 8:13 pm

Strider wrote:Checksum is a number additional to the UIN. Mine didn't have one.

Proof of beacon registration is the sticker they send you.


NSS?

Re: PLB rescueME 115 grams

Sat 03 Aug, 2013 9:00 pm

Rob A wrote:
Strider wrote:Checksum is a number additional to the UIN. Mine didn't have one.

Proof of beacon registration is the sticker they send you.


NSS?
Huh?

Re: PLB rescueME 115 grams

Mon 05 Aug, 2013 1:51 pm

Just called AMSA, apparently Ocean Signal used the wrong algorithm to calculate the checksum and it's quite OK to register with just the UIN.

Re: PLB rescueME 115 grams

Mon 05 Aug, 2013 1:58 pm

Good to know you're all sorted :)

Re: PLB rescueME 115 grams

Mon 05 Aug, 2013 2:33 pm

findbuddha wrote:Just called AMSA, apparently Ocean Signal used the wrong algorithm to calculate the checksum and it's quite OK to register with just the UIN.

Thanks for confirming with the authority. As to who used the "wrong" algorithm, I suspect that'll depends on who was talking.

Re: PLB rescueME 115 grams

Sun 01 Sep, 2013 7:16 pm

I just bought one of these at Peter Johnston in Hobart for $350.

Re: PLB rescueME 115 grams

Sun 01 Sep, 2013 7:31 pm

Malbena wrote:I just bought one of these at Peter Johnston in Hobart for $350.
That's not a bad price for a bricks and mortar store. Well done!

Re: PLB rescueME 115 grams

Sat 14 Sep, 2013 5:50 pm

I am in the market for a PLB has anyone had experience with the Kannard Safelink Solo GPS PLB ??
corvus

Re: PLB rescueME 115 grams

Sat 14 Sep, 2013 7:03 pm

I have not had experience with the Kannard Safelink Solo GPS PLB.
I'm not sure why you would prefer it over the rescueME PLB1.
They cost about the same, both have a homing beacon, both are waterproof to at least 10m, both have LED flash.
But the rescueME is ligher. :s

Re: PLB rescueME 115 grams

Sat 14 Sep, 2013 7:08 pm

And smaller.
Post a reply