Page 1 of 2

Hyperlite Mountain Gear Dirigo 2

PostPosted: Wed 13 Mar, 2019 6:27 am
by Zapruda
HMG is releasing a new 2 person shelter in a few days - https://www.instagram.com/p/Bu6XfHCjthk/

Seems to be an all In one pyramid, maybe similar to the Plaxamid. It could be very interesting.

Lots of great DCF shelters being released at the moment. Exciting times.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Wed 13 Mar, 2019 6:41 am
by wildwanderer
Would be nice if all the manufacturers got into a price war to sell their new shiny 2p DCF/silpoly shelters :D

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Wed 13 Mar, 2019 9:19 am
by Franco
If there was a price war it would eliminate most cottage manufacturers.
Only big brands that can place large orders with a Chinese manufacturer and sell at close to cost could do that.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Wed 13 Mar, 2019 9:42 am
by wildwanderer
Franco wrote:If there was a price war it would eliminate most cottage manufacturers.
Only big brands that can place large orders with a Chinese manufacturer and sell at close to cost could do that.


It was a joke franco :P

Cottage manufacturers have given us some amazing products and while their pricing is uncomfortable for my wallet, I understand people need to earn a decent wage to live in a country like US/Australia etc.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Wed 13 Mar, 2019 10:32 am
by Franco
In other industries is not all that uncommon to buy market share and or drive others out of business by dumping goods at cost or below.
It is illegal in most places but hard to prove at times.
Not really worth it in this, outdoor gear, case.
My comment was because I do see that some think manufacturers are ripping them off charging what they do with these DCF shelters.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Wed 13 Mar, 2019 11:14 am
by ribuck
The price war will come when the patents expire and multiple manufacturers can move in.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Wed 13 Mar, 2019 12:29 pm
by Franco
Not sure about that.
I think the cost of making the various types of DCF is very high.
Silnylon is now over 40 years old , yet till at least a few years ago it kept increasing in price.
Not that making silnylon is all that simple but I am guessing it's easier than making DCF.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 1:05 pm
by Nuts
'Instagram'! now there's a great model name.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 2:08 pm
by Zapruda
Nuts wrote:'Instagram'! now there's a great model name.


Why?

Edit: Oh, took me a while... Hmmm. One of those days

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 3:07 pm
by wildwanderer
I still dont get it.. :oops:

though the satirical part of me thinks it might be a reference to HMGs love of the artistic filter with their marketing shots..
But surely everyone else is not as cynical as me.. :P

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 3:23 pm
by Franco
Coming up with a new name is harder than it would seem. The simple reason is that if you think of a good one, it already has been used.
I am pretty confident that I found out why they chose that name , the clue was in this paragraph , on Instagram :

"Now, we’ve taken ten years of #DyneemaComposite Fabrics expertise and legendary user experiences to move not just our needles, but those of the outdoors world. ."
Dirigo is Latin (and Italian) for I lead, same origin as director/direction and so on.
In other words HMG is showing the way (well according to them)

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 3:24 pm
by Franco
double post

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 3:40 pm
by Zapruda
wildwanderer wrote:I still dont get it.. :oops:

though the satirical part of me thinks it might be a reference to HMGs love of the artistic filter with their marketing shots..
But surely everyone else is not as cynical as me.. :P


The gram part of Instagram I’m guessing, I think, maybe, I don’t know!

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 5:05 pm
by Nuts
Well yeah, it rolls off the tongue. I guess it can be anything, only limited by imagination.
Quick pitching 'instant'/ extra light, a 'gram'?
I'll save you from thoughts more in the realm of gratification and subliminal marketing.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 5:13 pm
by Zapruda
Nuts wrote:
I'll save you from thoughts more in the realm of gratification and subliminal marketing.


You seem to have a chip on your shoulder. What subliminal marketing are we all oblivious to that you seem to be able to see through?

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 5:48 pm
by Nuts
A chip? oh no, best weigh it haha

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 5:50 pm
by Franco
Maybe choosing Nuts as a forum name was not uninspired.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 6:03 pm
by Nuts
Sorry, ok, no, you are welcome to take the first view. Really. It's not a judgement on your enthusiasm. I don't see the point of marketing like a sportscar release, i didn't think much of TT doing the same (at the risk of damaging the beautiful thing I have going with Franco). What is the point of such marketing??

I gave a different perspective to what are apparent facts for the new OP shelter to stony silence. It doesn't take anything like expertise, just facts there to see (and I was out on some of them looking back but nobody will ever know..) (and yes it's the UL pages, and yes iv'e defended that and yes have nothing against this material etc)

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 6:26 pm
by Zapruda
Nuts wrote:Sorry, ok, no, you are welcome to take the first view. Really. It's not a judgement on your enthusiasm. I don't see the point of marketing like a sportscar release, i didn't think much of TT doing the same (at the risk of damaging the beautiful thing I have going with Franco). What is the point of such marketing??

I gave a different perspective to what are apparent facts for the new OP shelter to stony silence. It doesn't take anything like expertise, just facts there to see (and I was out on some of them looking back but nobody will ever know..) (and yes it's the UL pages, and yes iv'e defended that and yes have nothing against this material etc)


From a companies perspective, it ensures they have sufficient interest in the product prior to its release. People will now actively seek out specs upon its release. It creates discussion and puts the company back in the limelight. I see nothing wrong with it. Horses for courses.
It is standard practice for anything from cameras to sneakers and beyond. It hurts no one.

As for you comments on the OP offering in that thread, I assume people like myself are sick explaining why this material appeals to us and why we use it. After a while it gets boring and repetitive. If you would like to have a proper discussion about the pros and cons of DCF for shelters, I would be happy to have one in another thread focused specifically on the topic. I use different materials for different shelters for different adventures. There is no one shoe fits all scenario. No one here is saying this is the best fabric. If HMG released this shelter in Sil or Poly I would have posted here as well.

I post these updates and releases in the Ultralight forum for people who are presumably here because they have an understanding of the philosophy or a willingness to learn about it. I don’t post them in the general equipment forum because they don’t appeal to the larger demographic.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 7:16 pm
by Nuts
At the risk of raising your temps, I covered a swath of attributes for DCF in that thread, which may hint at some basic understanding. There's no need to go back over anything (unless you wish). What else was there? not needing a quick cinch before bed? Lest these topics just become an extension of marketing by the marketed, useless to anyone without DCF pockets and a dream. Please don't fall back to pointing out a group of super-feats by well known champs, they invariably could have done similar with a poly tarp.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 7:37 pm
by Zapruda
Nuts wrote:At the risk of raising your temps, I covered a swath of attributes for DCF in that thread, which may hint at some basic understanding. There's no need to go back over anything (unless you wish). What else was there? not needing a quick cinch before bed? Lest these topics just become an extension of marketing by the marketed, useless to anyone without DCF pockets and a dream. Please don't fall back to pointing out a group of super-feats by well known champs, they invariably could have done similar with a poly tarp.


Ill leave the raised temps to you, Nuts. But next time don’t shove words in my mouth. It’s pathetic.

I think you have totally misinterpreted what I have written to suit your own agenda. Once again, pathetic.

I’d love to get the topic of the new tent back on track...

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 7:47 pm
by Lamont
I'm on it Batman-
back on track -my conjecture for what it's worth and a bit of fun trying to guess-
-it looks like (from the top/above picture) a Plexamid type set up?
- 'Hatty' a la Plexamid (dare it be a wee cross bar/tube/rods) type set up?
-I'm feeling a LHG sort of inner (tubey) working but more simple -or wee CF rod/s.
-Sticks angled inwards? It is a two stick set-up isn't it?
Interesting they say the DCF weight is slightly more than the 'heaviest' one the zpacks offer.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 7:49 pm
by Nuts
Huh? What words? What agenda? More to the point - What 'track'??

(edit- oh, i see, guessing. Is that the point??)

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 7:55 pm
by Zapruda
Lamont wrote:I'm on it Batman-
it looks like (from the top/above picture) a Plexamid type set up?
'Hatty' a la Plexamid (dare it be a wee cross bar/tube/rods) type set up?
I'm feeling a LHG sort of inner (tubey) working but more simple -or wee CF rod/s.
Sticks angled inwards? It is a two stick set-up isn't it?
Interesting they say the DCF weight is slightly more than the 'heaviest' one the zpacks gang offer.


Exactly what I am thinking. Rather than two straight poles like the duplex it will have two poles angled in to the peak like a mid/plexamid. Making it a little more stable? Two vestibules as well?

Thicker DCF is good if it actually prolongs the life of the shelter.

I’m keen to see what it looks like tomorrow.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 8:02 pm
by Lamont
https://lightheartgear.com/products/lightheart-solong-6 have you seen this video?
this is what I thought of -poles angled from the outside but under the porch not inside- in with a tubey cross piece (removable for packability? dare they do it?) or the obvious- the middle 'hatty' thing is fixed and a panel.
I am feeling a LHG sort of clone/Plexamid.
Time for some Vodka from the freezer, ciao ciao.

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Thu 14 Mar, 2019 8:13 pm
by Nuts
Zapruda wrote: Thicker DCF is good if it actually prolongs the life of the shelter. .


Well yes, this is correct, it could, to a degree. DCF commonly fails in the folds/ accumulation of creases, eventually leaking through the Mylar layer. The lifespan would be extended by increasing the weight of the PET layers rather then the weight of UHMWPE, unless something caused a catastrophic rip. Assuming the performance of Zpacks was a benchmark and had a limited life-span they could then claim a longer life potential (as an assumption, not yet a fact).

(ps. not a post about you nor an attempt to devalue your opinion. Facts for the discerning shopper)

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Fri 15 Mar, 2019 6:17 am
by Zapruda
Nuts wrote:
Zapruda wrote: Thicker DCF is good if it actually prolongs the life of the shelter. .


Well yes, this is correct, it could, to a degree. DCF commonly fails in the folds/ accumulation of creases, eventually leaking through the Mylar layer. The lifespan would be extended by increasing the weight of the PET layers rather then the weight of UHMWPE, unless something caused a catastrophic rip. Assuming the performance of Zpacks was a benchmark and had a limited life-span they could then claim a longer life potential (as an assumption, not yet a fact).

(ps. not a post about you nor an attempt to devalue your opinion. Facts for the discerning shopper)


And for the discerning shopper, how long until these folds and creases cause the failure in the mylar layer?

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Fri 15 Mar, 2019 6:23 am
by Lamont
http://www.adventurealan.com/hyperlite- ... nt-review/ lets have a tour with Alan. Watch his the video. Seems very windworthy.Event fabric mixed in! Would not the condensation run over the event end panels into the tent?

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Fri 15 Mar, 2019 6:30 am
by Zapruda
Specs and prices are up.

I don't see anything particularly exciting here. The sloping side walls will likely be a pain and obviously take up interior space. Two people might have trouble sitting up at the same time. Length is ok and the breathable DCF at the head and foot ends is interesting. I would like to see how it goes in the wild and how much it actually affects condensation forming. The end panels look like they can be pulled out to create more space, it is a nice design and different to the way other companies are doing it.

If people are after a DCF and fair weather 2 person tent, its still hard to beat the Duplex for weight and interior space. Or the TT Stratospire Li, which is still lighter, cheaper and double walled.

I still think its great that more and more companies are using DCF and trying new designs.

$$$ = $1,125 aud.


Weight:


1.75 lbs | 28 oz | 794g
Weight includes perimeter guy lines only.

Materials:

Floor: DCF11
Exterior Walls: DCF8 / DCF-WPB
Vestibules: DCF8
Interior Doors: No-See-Um Mesh
Trekking Pole Grommets: DCH50
Peak Trekking Pole Cups: DCHW

Dimensions:

Packed Size: 12” x 8” x 6” | 30.4cm x 20.3cm x 15.2cm
Interior Peak Height: 45" | 114.5cm
Floor Area: 52" (W) x 90" (L) | 32.5 sq. ft.
Pitched Dimensions: 92" (W) x 95" (L)

https://www.hyperlitemountaingear.com/p ... cking-tent

Re: Hyperlite Mountain Gear Dirigo 2

PostPosted: Fri 15 Mar, 2019 8:15 am
by Franco
Nice video clip from Alan.
I like the design a lot except that because it does not have any top vents I would think that condensation could build up enough to drip on you when windy and rainy or under heavy rain. Not that it would be the first shelter to do that...
BTW, Alan mentioned that condensation slides off those panels and goes down to the floor. Given enough of it it may end up wetting your sleeping bag. That is something that can happen with the pole inside Bibler/Black Diamond single wall tents. (condensation forms on the colder than air poles)