Johnnyboyjt wrote:Hi, looking to replace a decade old MD jacket. Absolute requirements as stated in the subject. Impossible to find! MD do the Cumulus,but it's paclite and I need 3 layer for Tassie. Macpac do one without pit-zips; Patagonia / Arcteryx , Mont don't so zip away hoods. Any help appreciated!
Lamont wrote:Johnnyboyjt wrote:Hi, looking to replace a decade old MD jacket. Absolute requirements as stated in the subject. Impossible to find! MD do the Cumulus,but it's paclite and I need 3 layer for Tassie. Macpac do one without pit-zips; Patagonia / Arcteryx , Mont don't so zip away hoods. Any help appreciated!
What's a zip away hood?
Joynz wrote:https://www.macpac.com.au/mens/jackets-vests/rain-jackets/macpac-gauge-rain-jacket---mens/114710.html?cgid=mens-jackets_vests-rain_jackets#sz=12&start=14
Thanks - doesn't look like this is still available though?
Not goretex, but 3 layer with rollaway hood and pit zips.
Warin wrote:Lamont wrote:Johnnyboyjt wrote:Hi, looking to replace a decade old MD jacket. Absolute requirements as stated in the subject. Impossible to find! MD do the Cumulus,but it's paclite and I need 3 layer for Tassie. Macpac do one without pit-zips; Patagonia / Arcteryx , Mont don't so zip away hoods. Any help appreciated!
What's a zip away hood?
A rain hood that attaches using an opening zipper to a rain jacket.
Should be easy enough to add pit zipps to a rain jacket that does not have them. 'Water proof zipps' are not really 'water proof' more 'water resistant'.
Warin wrote:Someone has already done it before you. Some have even put it up on the web..
https://www.youtube.com/watch?v=opCC2470QWQ
Nuts wrote:Find one? Rare beast i'd expect pit zips a feature more of high tech, roll hood of casual jackets?
If not- it would be much easier to add a tab to hold the rolled hood of a jacket with pit zips. I've done similar with a piece of light webbing and a simple/ single snap lock (one tiny hole that can be sealed before snapping)
Joynz wrote:https://www.macpac.com.au/mens/jackets-vests/rain-jackets/macpac-gauge-rain-jacket---mens/114710.html?cgid=mens-jackets_vests-rain_jackets#sz=12&start=14
Not goretex, but 3 layer with rollaway hood and pit zips.
Nuts wrote:Those Jackets look like a bargain moondog.
I should have said 'Snap', rather than 'snap lock' (which would work as well if you wanted to sew a strap on).
The metal ones use a punch which may be the cheapest option: https://www.ebay.com.au/itm/40pcs-Snap- ... 2749.l2649
So.. punch a snap (eg the male side) through, around the label somewhere/ inside below the collar and trap a strap of some sort with the snap. Put some sealant on the snap before closing it down Then put the alternate snap (eg. female side) on the end of the strap making the strap an appropriate length to hold the rolled up collar.
I've used 'similar' to pull a hood back further rather than a rolled up hood. I'll grab a pic if you are still (or more) confused?
Users browsing this forum: No registered users and 29 guests