by Moondog55 » Tue 27 Aug, 2019 8:14 am
I've already done the simulations.
Rated power isn't what I normally design for, I usually aim for the lowest F10 I can get, SPL per watt is best in a big box. With no low pass protection it will take 200 watts and hit 108dB at ~50 and the F10 is 20Hz in modelling. They are older amps so the subsonic cut-off is 25Hz using a Butterworth 2 slope so If I use the low filter they will take 300 but you only get another 1.5dB and it is at X-Max plus 10% which is borderline close to X-Damage
Bass boost is a maximum of 12dB at 40Hz on my cheap party mixer so I can only use a third of the amps normal power if I max the bass boost and If I do I can be sure the wallopers will be knocking on the door and telling me to turn it down no matter how many of my neighbours I invite
Ve are too soon old und too late schmart